Optimized Photoluminescence Quantum Yield in Upconversion

Optimized Photoluminescence Quantum Yield in Upconversion Composites considering the Scattering, Inner Filter Effects, Thickness, Self Absorption, and Temperature

Introduction

Optimising upconversion (UC) composites is challenging as numerous effects influence their unique emission mechanism. Low scattering mediums increase the number of dopants excited, however, high scattering mediums increase the UC efficiency due to its non-linear power dependency. Scattering also leads to greater thermal effects and emission saturation at lower excitation power density (PD). In this work, a photoluminescence quantum yield (PLQY) increase of 270% was observed when hexagonal NaYF4:(18%)Yb3+,(2%)Er3+ phosphor is in air compared to a refractive index[1]matched medium. Furthermore, the primary inner-filter effect causes a 94% PLQY decrease when the excitation focal point is moved from the front of the phosphor to 8.4 mm deep. Increasing this effect limits the maximum excitation PD, reduces thermal effects, and leads to emission saturation at higher excitation PDs. Additionally, self-absorption decreases the PLQY as the phosphor’s thickness increases from 1 to 9 mm. Finally, in comparison to a cuboid cuvette, a 27% PLQY increase occurs when characterizing the phosphor in a cylindrical cuvette due to a lensing effect of the curved glass, as supported by simulations.

Overall, addressing the effects presented in this work is necessary to both maximize UC composite performance as well as report their PLQY more reliably.

Using Edinburgh Instruments FLS920 and co-written by Edinburgh Instruments Application Scientist, Stavros Misopoulos, you can download the full article and read the results of this research.

Download the full article here.

Fluorescence Spectrometers

At Edinburgh Instruments we manufacture a variety of spectrometers that are dedicated to the measurement of fluorescence lifetimes. You can view our full range of fluorescence spectrometers here .

If you would like to stay up to date with our latest news, research and products, why not follow us on social media and sign up to our infrequent eNewsletter below.