Tongdy  VOC Monitor F2000IAQ-VOC

Features

• Real time monitoring ambiance air quality, over range 0~30ppm

• LCD displaying air contaminants with temperature and humidity (optional) at the same time

• Low power consumption, Long life and small size

• Providing 0~10V analog signal and relay dry-contact output. Can be used as a transmitter of VOC or as a controller of VOC, temperature and humidity (optional)

• RS-485 communication interface, 15KV antistatic protection, independent base address setting

• Analog output with two alternatives: linearised over full range output or PID control output

• Optional on board relay with field adjustable trip point according to VOC, temperature or humidity (programmable selection)

• Microprocessor control with quick response

• Local adjustable range VOC: 0~30ppm; temperature:5~45c; humidity:5～95％RH

• Switch off Timer function 0.5 to 12 hours for ventilation device

• Two types selectable: standard type and domestic type

• Many models are available and suitable for various applications

Application

F2000IAQ-VOC is used to detect and control air contaminants, as well as room temperature and humidity, providing with up to one 0~10VDC analog signal output and two dry contact outputs. The F2000IAQ-VOC can be used as a transmitter or as a direct controller which sends its output to any DDC or system of the control of ventilation equipment depending on the detection air quality, temperature and humidity.

F2000IAQ-CO2 provides an RS485 network interface and independent base address to PC or other control system, so each room of the ventilation system can be managed and controlled intelligently.
 

• Ambiance air quality detection and alert

• Ventilation control

• Air quality monitors

• Odor monitors