Tongdy  CO Monitor F2000IAQ-CO

Features
 

• Real time monitoring CO level with range from 0 to 1000ppm

• LCD can display CO, temperature and humidity at the same time

• Full time monitoring CO level, even the slightest leak can be detected

• Can work as work as a alarm or controller of CO, also can work as a CO detector

• Providing 0～10V analog signal and 2 relay dry contact outputs

• Analog output with two alternatives: linearized over full range output or PID control output

• Preset the first, second CO alarm level with buzzer alarm

• Semiconductor sensor technology with long lifetime

• RS ? 485-communication interface, 15 KV antistatic protection, independent address setup

Application

F2000IAQ-CO is used to monitor room CO level as well as room temperature and humidity, and is widely applied in CO level monitoring and alarm systems. With one 0~10VDC analog signal output and two relay dry-contact outputs, F2000IAQ-CO can be used as a programmable logical controller to direct control CO level, and also as a transmitter to send its output to any compatible electronic analog control, DDC/PLC controller or automation system for the control of ventilation..

F2000IAQ-CO provides an RS-485 communication interface and independent base address to PC or other control system, so each room of ventilation system can be managed and controlled intelligently.
It can be used as a prevention monitor of CO potential leak and controller of ventilation system.

• Human environment, Industrial environment

• Underground parking lot, maintenance garage

• Refrigeration room and other places where air quality is likely to worsen