|
TISSA series of femtosecond and continuous
wave Ti:sapphire oscillators and oscillator kits has been
designed as a series of versatile and low-cost light
sources for various spectroscopy applications and further
ultra-short pulse amplification. Among other applications,
TISSA20 is recommended as a seed source for MPA50
Ti:sapphire multipass amplifier; TISSA100 and TISSA50 are
recommended as an excitation source for FOG100
up-conversion fluorescence system.
|
|
TISSA20 |
TISSA50 |
TISSA100 |
|
Pump Power 1) |
3-5 W |
3-5 W |
3-10 W |
|
Output Power
at 800 nm |
300-500 mW |
300-700 mW |
300 mW - 1.0 W |
|
Pulse width |
< 20 fs |
< 50 fs |
< 100 fs |
|
Wavelength Tuning Range |
800±30 nm |
750-860 nm 2) |
750-860 nm 2) |
|
Pulse Repetition Rate |
86 MHz |
|
Polarization |
Horizontal |
|
Divergence |
< 2 mrad |
|
Output Beam Diameter |
2-3 mm |
|
Spatial Mode |
TEM00 |
|
Stability |
3% typical |
|
1)
DPSS or Ar-ion laser is required, TEM00 mode is important
2) Wavelength tuning range with standard set of
mirrors. 700 -980 nm tuning range on request.
-
Rotation
of pump beam polarization with optically active quartz
plate
-
Electronic starter
-
One year
warranty for specified parameters
-
Harmonic
generators and autocorrealtor are available optionally
TISSA
Series Femtosecond Ti:sapphire Oscillator Kits
TISSA series of Ti:sapphire oscillator kits represents
an excellent compromise between time and cost. TISSA kit
contains all important optical and mechanical components,
which can be aligned and adjusted by the user following
enclosed detailed instructions. Perfect adjustment gives
output characteristics typical for corresponding TISSA
oscillator. One year warranty is given for all kit
elements.
|
