Operating
Conditions
15 - 32°C 0 - 95% RH,
non-condensing |
Thermistor
10k Ohms +/-2.5% @ 25°C
|
Measurement
Range
0-2000 ppm |
Night
Setback Override Button
Shorts the thermistor output
when depressed |
Method
Single Beam Absorption
Infrared™
Diffusion sample method
|
Slide
Potentiometer (5011 Only)
Left (stop) 0k Ohms (+/-5k
Ohms)
Center 50k Ohms (+/- 7.5k Ohms)
Right (stop) 100k Ohms (+/- 15 Ohms) |
Elevation
(Pressure) Correction
Add 0.13% of reading per mm
Hg decrease from 760 mm Hg (On-board
correction, user set with UIP software),
preset @ 1000 ft above sea level |
Input/Output - Power
18-30 VAC RMS, 50/60 Hz
half-wave rectified 18-42 VDC polarity
protected 1.75 VA
max average power 3.25 VA peak power |
Warm-Up
Time
@ 25°C <2 minutes |
Wiring
18-28 AWG stranded copper
wire only. 2 wires each for power, analog,
thermistor, and slide pot.
|
Response
Time
0-90% <2 minutes |
Storage
Temperature
-40 - 70°C |
Agency
Certification
FCC Part 15 Class B, CE,
and CA Energy Commission |
Analog
Output
0-10 VDC (Source 100mA, Sink
10mA) 4-20 mA (RLmax = 500 Ohms) Jumper
selectable |
Accuracy
±100 ppm or 7% whichever is
greater |
Applications
