home > Lasers > Diode Pumped Solid State Lasers from CNI > Green Lasers > MLL series green lasers

 

Diode Pumped Solid State Lasers from Changchun New Industries - MLL Series

MLL Series Low Noise Green Lasers

The MLL series represents a range of 532nm laser with a low amplitude noise characteristic, making it ideal when stability is required.

These low-cost units are widely used for in laser medical treatment as well as laser sources for measurement techniques in physics and biochemistry departments.

Output powers of up to 8W are available for this series.

 

 

 

MLL

 

MLL-F

MLL-H

MLL-W

Wavelength (nm)

532

532

532

532

Output power (mW)

1-450

500-1200

1500-2500

3000-8000

Transverse mode

TEM00

Near TEM00

Near TEM00

Near TEM00

Longitude mode

Several

Several

Several

Several

Operating mode

CW

CW

CW

CW

Power stability (rms, over 4 hours)

<±1%, <±3%,<±5%

<±1%, <±3%,<±5%

<±1%, <±3%, <±5%

<±1%, <±3%, <±5%

Warm-up time (minutes)

<15

<15

<15

<15

M2 factor

<1.2

<2.0

<2.0

<2.0

Beam divergence, full angle (mrad)

<1.5

<2.0

<2.0

  <2.0 

Beam diameter at the aperture (mm)

~2.0

~3.0

~3.0

~4.0

Beam height from base (mm)

24.8

29

45

93.5

Spectral linewidth (nm)

<0.1

<0.1

<0.1

<0.1

Polarization ratio

>100:1 (0 or 90 degree)

>100:1

>100:1

>100:1

Noise of amplitude (rms)

<1%

<1%

<1%

<1%

Pointing Stability (mrad)

<0.05

<0.05

<0.05

<0.05

Operating temperature (C)

10-35

10-35

10-35

10-35

Expected lifetime (hours)

10000

10000

10000

10000

Net weight of laser head (kg)

0.645

0.86

1.47

8.0

Dimensions of laser head (mm)

140.8(L)×73(W) ×46.2(H)

155(L)×77(W) ×60(H)

211.3(L)×88(W) ×74(H)

461(L)×152(W) ×139(H)

Power supply

(80-260VAC)

Integrated driver

(LD-WL206)

Integrated driver

(PB256)

Integrated driver

(PB256)

Integrated driver

(HB257)

Power Supply Dimensions

 

135(L) ×130(W) ×61(H)

1kg

 

238(L) ×146(W) ×94(H)

2.88kg

 

238(L) ×146(W) ×94(H)

2.88kg

 

324(L) ×277(W) ×142(H)mm

13kg

Warranty time

1Year

1Year

1Year

1Year

TTL modulation

Optional, 1-10kHz or higher (On request, higher rate up to 40kHz available)

Optional, 1-10kHz or higher (On request, higher rate up to 40kHz available)

Optional, 1-10kHz or higher (On request, higher rate up to 40kHz available)

TTL modulation up to 2kHz is available

Analog modulation

Optional, 1-10kHz or higher (0~max output with 0~5VDC signal input)

Optional, 1-10kHz or higher (0~max output with 0~5VDC signal input)

Optional, 1-10kHz or higher (0~max output with 0~5VDC signal input)

Analog modulation up to 2kHz is available

 

 

 

 

 

 

 

 

 

 

The specifications of these lasers can change due to continuing development please contact Edinburgh Instruments for the latest datasheets.

 

Contact Us


  © Copyright 2003 - 2008. Edinburgh Instruments Ltd. All Rights Reserved.