| |
Diode Pumped Solid State Lasers from Changchun New
Industries - MBL Series
|
Model |
MBL-II |
MBL-III |
|
Wavelength (nm) |
473 |
|
Output power (mW) |
1-100 |
|
Transverse mode |
TEM00 |
|
Operating mode |
CW |
|
Power stability (rms,
over 4 hours) |
<3%, <5% |
<5%,<10% |
|
Warm-up time (minutes) |
<15 |
|
M2 factors |
<1.2 |
|
Beam divergence, full angle (mrad)
|
<1.5 |
|
Beam diameter at the aperture (1/e2)(mm) |
~2 |
|
Polarisation ratio |
>100:1 |
|
Noise of amplitude (rms) |
~30% |
|
Point stability, after warm-up (mrad) |
<0.05 |
|
Operating temperature
(ēC)
|
10-35 |
|
Expected lifetime (hours)
|
10,000 |
|
Dimensions of Laser head (mm)
|
156(L)x73(W )x46.2(H) |
116(L)x73(W)x46.2(H) |
|
Net weight of laser head (kgs) |
0.75 |
0.645 |
|
Power supply (110 or 220
VAC)
|
Model:LD-WL201
|
206(L)x37(W)x76(H)
3.0 kgs
|
|
Power supply
(80-260 VAC) (mm) |
integrated driver(LD-WL206) |
130(L.)x120(W.)x65(H.)
1.0kgs |
|
separated driver(LD-WL203) |
120x60x36
(adapter)
0.35kg
100x62x55
(PC board)0.25kg |
|
TTL Modulation |
Optional, up to 1-10kHz
(Higher rate up to 40kHz available on
request) |
|
Analogue Modulation |
Optional, up to 1-10kHz
or higher
(0~max output when 0~5VDC signal input) |
|
Warranty time |
1 year
|
|
MBL With 80-240VAC separated switch
Power Supply (model: LD-WL203)
MBL With 80-240VAC integrated switch Power Supply
(model: LD-WL206)
|
|
Model |
MBL-H |
MBL-W |
|
Wavelength (nm) |
473 |
|
Output power (mW) |
120-200 |
500-1000 |
|
Transverse mode |
TEM00 |
|
Operating mode |
CW |
|
Power stability (rms,
over 4 hours) |
<5%, <10% |
<5%,<10% |
|
Warm-up time (minutes) |
<15 |
|
M2 factors |
<1.5 |
<2.0 |
|
Beam divergence, full angle (mrad)
|
<1.2 |
|
Beam diameter at the aperture (1/e2)(mm) |
~3 |
|
Beam
height from base (mm) |
29 |
144 |
|
Spectral linewidth (nm) |
<0.1
|
|
Polarisation ratio |
>100:1 |
|
Noise of amplitude (rms) |
~30% |
|
Point stability, after warm-up (mrad) |
<0.05 |
|
Operating temperature
(ēC)
|
10-35 |
|
Expected lifetime (hours)
|
8,000 |
|
Dimensions of Laser head (mm)
|
130(L) × 77(W )× 60(H) |
430(L) x 125(W) x 180(H) |
|
Net weight of laser head (kgs) |
0.86 |
8 |
|
Power supply (110 or 220
VAC)
|
245(L)×152(W)×113(H)
2.88 kgs
|
430(L)x365(W) x 125(H)
13 kgs |
|
TTL Modulation |
Optional, up to 1-10kHz
(Higher rate up to 40kHz available on
request) |
In
Development |
|
Analogue Modulation |
Optional, up to 1-10kHz or higher |
|
|
Warranty time |
1 year
|
|
Model |
MBL-F-I |
MBL-F-II |
|
Wavelength (nm) |
457 |
|
Output power (mW) |
10-400 |
400-800 |
|
Transverse mode |
Near
TEM00
|
TEM01 |
|
Operating mode |
CW |
|
Power stability (rms,
over 4 hours) |
<5%,<10%; others
specs available |
|
Warm-up time (minutes) |
<15 |
|
M2 factors |
<2.0 |
|
Beam divergence, full angle (mrad)
|
<1.5 |
|
Beam diameter at the aperture (1/e2)(mm) |
~3.0 |
|
Beam height from base plate (mm) |
45 |
|
Spectral linewidth (nm) |
<0.1 |
|
Polarisation ratio |
>100:1 |
|
Point stability after warm-up (mrad) |
<0.05 |
|
Operating temperature
(ēC)
|
10-35 |
|
Expected lifetime (hours)
|
10,000 |
|
Net weight of laser head (kg) |
1.47 |
|
Dimensions of laser head (mm) |
211.5 (L) x 88 (W) x 74 (H) |
|
Power supply (110 or 220
VAC)
|
Integrated
driver (PB256-FDA) |
Dimensions: 238 mm (L) x 146 mm (W) x 102 mm
(H)
2.88 kg
|
|
TTL Modulation |
Optional, 2kHz or higher
(Others on
request, up to 30kHz ) |
|
Warranty time |
1 year
|
|
Analog modulation |
Optional, 2kHz or higher (others on request,
up to 30kHz) (0~max output / 0~5V input) |
|
|
MBL-W
500-1000mW
MBL-H 120-200mW
|
|
|
