MPA50 Femtosecond Multipass Ti:Sapphire Amplifier

MPA50 Ti:sapphire amplifier system is based on the two-mirror confocal multipass Ti:sapphire amplifier configuration designed by CDP Corp. for effective femtosecond pulse amplification in different active media. MPA50 is a complete amplifier system containing pulse stretcher, multipass amplifier, pulse compressor, pulse picker and synchronisation electronics.
 

• Two-mirror confocal design

• 8-pass configuration

• Amplification of 30-fs pulses

• Single-shot autocorrelator (option)

• Harmonic generators (option)

• Nd:YAG pump laser is required

• TISSA20 seed laser is recommended

Specifications:

• Output pulse width: < 50 fs for TISSA20 seed pulses

• Operation wavelength: 780 - 840 nm

• Pulse repetition rate: 10 - 50 Hz, 1 kHz

• Output pulse energy: 1.0 mJ at 10 - 50 Hz, 0.3 mJ at 1 kHz

• Output polarization: horizontal

• Lotis LS series of frequency doubled Nd:YAG laser is recommended for the amplifier pumping at 10 - 50 Hz.
  Please, contact us about recommended pump laser for 1 kHz operation.